Description
Features
- Suitable for laboratory equipment
- Calrod immersion 1650 watt heating element , 50% faster startup than 25X
- 36% greater heating capability compared to 25X
- Crafted of the finest hand cast aluminum that resists aging and corrosion
- Stay-cool bakelite top handles and wing nuts
- Removable aluminum inner container with rack
- Interior stainless steel support stand
- More accurate TPI thermocouple, snapswitch and pilot light
- Portable, economical, reliable operation
- Pressure gauge conforms to the pressure gauge standard ANSI B40-1-1980
- Flexible metal exhaust tube
- 60 minute mechanical timer
Specs
Sterilizer
120 Volt, 50/60 Hz
1650 watts/13.75 amps
Capacity – 25 Quarts (Liquid)
Inside Diameter – 12 5/8 inches
Overall Height – 16 3/4 inches
Bottom Height – 12 1/4 inches
Inner Container
Inside Depth – 8 1/2 inches
Circumference – 35 7/8 inches
Inside Diameter – 11 1/8 inches
Capacity – 14.5 Qt Inner Container Capacity
How it works
Just a small amount of water is needed to create the dry steam for this sterilizer. After achieving a minimum temperature of 250°F(121°C), and a pressure of 17psi, the dry steam penetrates the contents, making them sterile in 35 minutes and ready for immediate use. No wiping down is necessary to remove chemical residue or moisture, and cutting edges are not dulled.
Using your sterilizer
Always remember to operate your All American Sterilizer with (preferably distilled) water. Be sure to check the manual and adjust parameters for high altitudes.
Jars, bottles, slants, etc. must be loosely capped so the steam can vent. Tools can be sterilized wrapped in foil.
Start with the control valve open. While the unit heats up, allow steam to be released from the valve for 5 minutes, then close the valve. Pressure will start to build and when the pressure gauge reaches the green zone (17-18 psi), open the control valve again and let it vent for 3-5 minutes.
When pressure returns to the green zone (17-18 psi), start timing the cycle for 35 minutes. When the cycle is done, shut off the unit and vent from the control release valve again but do not open the lid until pressure gauge reads 0 psi.
Promocode
Use promocode THINKFUNGI to obtain your sale price and support Think Fungi in their non-profit work of researching, educating and conserving fungi.
Note: Pricing is approximate as a result of currency conversion. Sale price: US $924.95
Reviews
There are no reviews yet.